If you have a fire or water emergency, please call us now at (201) 201-1123

To have the optimal experience while using this site, you will need to update your browser. You may want to try one of the following alternatives:

Fire & Water - Cleanup & Restoration

Commercial Mold Prevention

3/31/2022 (Permalink)

SERVPRO vans at a commercial job. SERVPRO vans outside a commercial facility in NJ on a Saturday morning.

Mold growth is NOT a new subject. In fact, many commercial structures end up closing their doors to business for months due to mold contamination.  That is why in any large facility the importance of maintaining that facility to deter water leaks, moisture problems, and poor air quality should be the main focus.

Most mold growth is discovered after we get called to remediate a water issue, and we discover it growing behind removed material such as sheet rock, sink vanities, cabinetry, etc. In many instances, the mold growth has gone undetected for months, if not years.

According to the Environmental Protection Agency, the key to mold control is moisture control. Solve moisture problems before they become mold problems.

Mold Prevention Tips

  • Fix leaky plumbing and leaks in the building as soon as possible.
  • Watch for condensation and wet spots.
  • Prevent moisture due to condensation by increasing surface temperature or reducing the moisture level in the air (humidity). To increase surface temperature, insulate or increase air circulation. To reduce the moisture level in air, repair leaks, increase ventilation (if outside air is cold and dry), or dehumidify (if outdoor air is warm and humid).
  • Keep heating, ventilation, and air conditioning (HVAC) drip pans clean, flowing properly and unobstructed.
  • Vent moisture-generating appliances, such as dryers, to the outside where possible.
  • Maintain low indoor humidity, below 60% relative humidity (RH), ideally 30-50%, if possible.
  • Perform regular building/HVAC inspections and maintenance as scheduled.
  • Clean and dry wet or damp spots within 48 hours.
  • Don't let foundations stay wet. Provide drainage and slope the ground away from the foundation.

Potential health concerns are also an important reason to prevent mold growth and to remediate/clean up any existing indoor mold growth.

Obviously staying on top of moisture issues is the key to keeping mold under control.
Should your commercial building need mold remediation, remember that SERVPRO has specially trained technicians that can handle the job. No job is too large or small, and we are available 24/7.

Other News

View Recent Posts